One-stop shop for Hertz in-car amplifiers, speakers & subwoofers FREE Delivery

Hertz DCX 100 Comp - 2 Way car speaker system: High density flux ferrite magnet, water repellent pressed paper cone woofer. Neodymium magnet, mylar dome tweeter.

The proprietary RHFC™ technology provides the ability to orientate the tweeter to attain the ideal dispersion and frequency response. Every element is optimized for maximum reliability and efficiency. Incredibly dynamic sound and constant, lasting performances in whatever factory locations.

Comp - 2 Way system: High density flux ferrite magnet, water repellent pressed paper cone woofer. Neodymium magnet, mylar dome tweeter. (Sold in pairs)

Performances without using separate components. ECX Energy coaxial are equipped with a unique tweeter features a new Tetolon® soft dome with built-in crossover. Every element is optimized for maximum reliability and efficiency. The magnet , with its implemented size to ensure excellent control of the mobile voice coil movement, and the neodymium dome tweeter offer unprecedented timber quality and linearity for a coaxial.

Hertz HCX 130.4 HI-ENERGY coaxial speakers prove continuous evolution and research aimed at offering the best installation flexibility and versatility. Their parameters were perfected for insuring constant, lasting performances in modern car compartments and thrilling, excellent sound. Made with Comp line woofers, HCX coaxial speakers feature a polypropylene cone with mica injection, DWR® exclusive surround, a new tweeter with pre-coated TETOLON® soft dome, ferrofluid-cooled neodymium magnet with excellent musicality and flat frequency response. Their small housing optimises off-axis response in order to always get efficiency, power handling and sound quality.

The woofers use the proprietary “V” Cone membrane, ensuring the best performance. The DT 16 neodymium tweeter provides wide, detailed high frequency response. The in-line hi/lo pass passive crossovers, and the rich accessory kit provided with these systems increase the installation possibilities

ENERGY SYSTEM products are the simplest solution to install a very good quality system in factory locations. High quality compact crossovers are supplied, very easy and quick to fit. Supplied with complete mounting hardware, these systems deliver ENERGY line sound philosophy - Listening to pure energy.

13cm (5.25") Component Speaker Set with a Peak Power Handling of 150 Watts

The HI-ENERGY SYSTEM line includes a wide range of complete kits, consisting in the excellent HT 25 neodymium tweeter and HV woofers, individually combined with a special crossover. Provided with the tweeter mounting hardware, with grilles and an easy owner’s manual, HI-ENERGY systems achieve the best results in every car compartment thanks to the possibility of adjusting tweeters attenuation level in three different ways.

13cm (5.25") Component Speaker Set with a Peak Power Handling of 200 Watts

Performances without using separate components. ECX Energy coaxial are equipped with a unique tweeter features a new Tetolon® soft dome with built-in crossover. Every element is optimized for maximum reliability and efficiency. The magnet , with its implemented size to ensure excellent control of the mobile voice coil movement, and the neodymium dome tweeter offer unprecedented timber quality and linearity for a coaxial.

Comp - 2 Way system: High density flux ferrite magnet, water repellent pressed paper cone woofer. Neodymium magnet, mylar dome tweeter.

Performances without using separate components. ECX Energy coaxial are equipped with a unique tweeter features a new Tetolon® soft dome with built-in crossover. Every element is optimized for maximum reliability and efficiency. The magnet , with its implemented size to ensure excellent control of the mobile voice coil movement, and the neodymium dome tweeter offer unprecedented timber quality and linearity for a coaxial.

With the HERTZ DIECI SYSTEM, you can easily build very good quality audio systems.

Woofers performs at best when used in factory cut-outs and the DT16 neodymium tweeter provides clear, wide high frequency response.

The passive filters, directly moulded on to connecting wires, and multiple hardware brackets supplied with these systems increase installation possibilities, in whatever conditions.

Energy systems are the ideal solution to install a very good quality system in factory locations. Given with complete mounting hardware, these systems synthesize and fully represent Energy line sound philosophy. Listening to pure energy.

HSK 165.4 - KIT 2Way HI-ENERGY SYSTEM line includes a wide range of complete kits, consisting in the excellent HT 25 neodymium tweeter and HV woofers, individually combined with a special crossover. Provided with the tweeter mounting hardware, with grilles and an easy owner’s manual, HI-ENERGY systems achieve the best results in every car compartment thanks to the possibility of adjusting tweeters attenuation level in three different ways.

Coax - 2 Way system: High density flux ferrite magnet, water repellent pressed paper cone woofer. Neodymium magnet, mylar dome tweeter.

Performances without using separate components. ECX Energy coaxial are equipped with a unique tweeter features a new Tetolon® soft dome with built-in crossover. Every element is optimized for maximum reliability and efficiency. The magnet , with its implemented size to ensure excellent control of the mobile voice coil movement, and the neodymium dome tweeter offer unprecedented timber quality and linearity for a coaxial.

Hertz HCX 690.4 HI-ENERGY coaxial speakers prove continuous evolution and research aimed at offering the best installation flexibility and versatility. Their parameters were perfected for insuring constant, lasting performances in modern car compartments and thrilling, excellent sound. Made with Comp line woofers, HCX coaxial speakers feature a polypropylene cone with mica injection, DWR® exclusive surround, a new tweeter with pre-coated TETOLON® soft dome, ferrofluid-cooled neodymium magnet with excellent musicality and flat frequency response. Their small housing optimises off-axis response in order to always get efficiency, power handling and sound quality.

HE, THE OEM SOUND SYSTEM POWER REINFORCEMENT! For car audio enthusiasts that are looking to upgrade their sound system, Hertz-Energy amplifiers are the best choice; designed and engineered according to the strict standards of the Elettromedia R&D
team. Hertz-Energy amplifiers are easily interfaced with your factory OEM sound system and are perfectly suited to expand your aftermarket sound system.

The special EP LINK feature provides the ability to “strap” two or more pairs of EP 1 D into a bridged mode to achieve power output of up to 1700W (RMS).
The EP 1 D features a Synchro D-Class technology, where the Output Stage PWM Driver Module generates its own digital clock and also generates the Power Supply PWM Driver clock in order to synchronize both of the stages, avoiding noise being generated inside the audio band. This technology has allowed an extremely high Signal/Noise ratio of 100dBA!
The power supply section is equipped with two multi-winding toroidal core transformers along with Low ESR 105°C capacitors, ensuring very high efficiency.
The EP 1 D boasts extreme reliability thanks to the use of FR-4 double layer PCB material. 70µm thick copper traces in combination with robust copper bars are used to increase the current transfer in the power supply sections.

The power supply stage features 8 toroidal transformers and the output stage, settable in bridged or stereo mode, features 20 -190A/360V impulsive current Mosfets: solid, robust power and thermal dissipation without compromise.
Direct Current® , the power supply connection system, transfers power between the battery and amplifier with very low contact resistance, to achieve the current transfer required for high SPL systems.
The Hertz SPL Stack System® provides the ability to stack multiple MP 15K UNLIMITED amplifiers, using 6 robust iron Brackets. With the Hertz SPL Stack System® your system can deliver 15.000 W, 30.000 W, 45.000 W, or more, just stack and connect!

HE, THE OEM SOUND SYSTEM POWER REINFORCEMENT! For car audio enthusiasts that are looking to upgrade their sound system, Hertz-Energy amplifiers are the best choice; designed and engineered according to the strict standards of the Elettromedia R&D
team. Hertz-Energy amplifiers are easily interfaced with your factory OEM sound system and are perfectly suited to expand your aftermarket sound system.
Download spec sheet .pdf

Energy ES subwoofers were designed to work best when used in small enclosures. However, their electro-acoustic parameters are optimised for use in many different enclosure types; both in terms of typology (sealed box, reflex, bandpass, etc.) and in size, insuring extraordinary versatility and performance. The use of a long excursion mobile voice coil and high flux density double magnet have created subwoofers that can stand very high power with outstanding musicality and bursting dynamics. The special anti-scratch finish and butyl rubber rings offer protection and an aggressive look.

Energy ES subwoofers were designed to work best when used in small enclosures. However, their electro-acoustic parameters are optimised for use in many different enclosure types; both in terms of typology (sealed box, reflex, bandpass, etc.) and in size, insuring extraordinary versatility and performance. The use of a long excursion mobile voice coil and high flux density double magnet have created subwoofers that can stand very high power with outstanding musicality and bursting dynamics. The special anti-scratch finish and butyl rubber rings offer protection and an aggressive look.

Hi-Energy HX Subwoofers represent the highest technological expression in terms of low frequency reproduction. The V-cone provides wide acoustic dispersion, making the sound even more powerful.

The HX subwoofers were designed to reproduce the very lowest octaves of the audio spectrum with precision, impact and power. Groundbreaking technologies in every detail: V-cone, forced ventilation system, low-resonance basket and ultra-efficient motor assembly. The Hi-Energy subwoofer range features dual coil models to increase the flexibility of your subwoofer system design. This will allow you to manage the different connectivity solutions and the number of subwoofers in a particular design in order to make the most of the amplifier power delivery characteristics. Dual voice coil, i.e.: double the power, double the efficiency, with even smaller boxes. The best solution to all your needs; low frequency output and control that will meet your most enthusiastic expectations.

The Hertz SPL Show subwoofers are the ideal solution for building mobile audio systems with emphasis placed on low frequency power and impact.
Featuring a stacked triple magnet motor assembly and 2 + 2 ohm dual voice coil, the three models, SX 250D, SX 300D, SX 380D differ only in their cone diameter: 250 mm, 300 mm, 380 mm respectively.
The SPL Show moving assembly is designed to ensure long and linear excursion. They feature a dual spider design and a four-layer voice coil wound on an extraordinary long aluminium former.
The Back Vented Spider Support decreases voice coil operating temperature, even during enhanced SPL usage. By connecting the two voice coils in parallel, impedance is cut in half, making the most of the amplifier's available power and achieving even higher sound pressure levels.

Hertz DT16 neodymium tweeter insures high level performance and accurate, colourless high frequency response thanks to its very light Mylar membrane. Installation is universal, thanks to the various mounting supports provided, including both surface and flush mounting.
* Size - 15mm (19/32")
* Comp - Myler dome, neodymium magnet tweeter
* Xover - Factory provided crossover DX100
* Sensitivity - 93dB/SPL Power - 80W@3.5kHz 12dB/Oct
* Frequency Range - 3 - 21kHz
* Impedence - 4 Ohm

Compactness, power handling, clear sound: ET 20 has an innovative, very light 20 mm Tetolon® soft dome which insures very fast response. The neodymium magnet efficiently controls mobile voice coil movement, providing this tweeter with high sensitivity and clear, natural sound. ET 20 is given with rich mounting hardware, which always allows the best installation solution in the most difficult positions.

Utmost performances in minimum space. HT 25 tweeter provides excellent sound quality. It’s very small and very versatile. Its semispheric soft dome is made of pre-coated TETOLON® and provides flat high frequency response, tonal accuracy and natural sound. Its rear acoustic chamber insures low Fs and very good transient response. The neodymium magnet combines high energy for mobile voice coil control and small size. The housings given with it permit to correctly install it in whatever car compartments, in order to build outstanding two or multi-way systems.

Extremely compact size for explosive performance: ST 25 is the first Hertz tweeter specifically designed for SPL competitions. The 25 mm ST 25 with CCAR (Copper Clad Aluminium Ribbon) voice coil features an extra-light aluminium membrane with high thermal dissipation. An extremely powerful Neodymium REN® magnet is employed along with a highly efficient compression loading horn, designed for maximum high frequency acoustic pressure.
* 25mm bullet tweeter for extreme applications
* Magnet: Neodymium REN ®
* Power handling: 100W @ 2.5kHz 12dB Oct.
* Impedance: 4 ohms
* Efficiency dB / SP: 107dB
* Frequency: 3kHz-20kHz
* Depth: 33.5mm
* Diameter of mounting hole: 43.5mm

Energy ES subwoofers were designed to work best when used in small enclosures. However, their electro-acoustic parameters are optimised for use in many different enclosure types; both in terms of typology (sealed box, reflex, bandpass, etc.) and in size, insuring extraordinary versatility and performance. The use of a long excursion mobile voice coil and high flux density double magnet have created subwoofers that can stand very high power with outstanding musicality and bursting dynamics. The special anti-scratch finish and butyl rubber rings offer protection and an aggressive look.

HE, THE OEM SOUND SYSTEM POWER REINFORCEMENT! For car audio enthusiasts that are looking to upgrade their sound system, Hertz-Energy amplifiers are the best choice; designed and engineered according to the strict standards of the Elettromedia R&D
team. Hertz-Energy amplifiers are easily interfaced with your factory OEM sound system and are perfectly suited to expand your aftermarket sound system.

Energy ES subwoofers were designed to work best when used in small enclosures. However, their electro-acoustic parameters are optimised for use in many different enclosure types; both in terms of typology (sealed box, reflex, bandpass, etc.) and in size, insuring extraordinary versatility and performance. The use of a long excursion mobile voice coil and high flux density double magnet have created subwoofers that can stand very high power with outstanding musicality and bursting dynamics. The special anti-scratch finish and butyl rubber rings offer protection and an aggressive look.

Energy ES subwoofers were designed to work best when used in small enclosures. However, their electro-acoustic parameters are optimised for use in many different enclosure types; both in terms of typology (sealed box, reflex, bandpass, etc.) and in size, insuring extraordinary versatility and performance. The use of a long excursion mobile voice coil and high flux density double magnet have created subwoofers that can stand very high power with outstanding musicality and bursting dynamics. The special anti-scratch finish and butyl rubber rings offer protection and an aggressive look.

The forced ventilation system provided by the venting holes on the bottom plate, along with a specifically designed extended centre pole piece and the materials selected for the voice coil, combine for high thermal dissipation. The ultra-light aluminium basket, with its spoke shared profile, reduces any unwanted resonance from the chassis itself. The special finishing materials and the rubber protection covering the magnetic assembly, besides decreasing resonance, add an aggressive, stylistic cosmetic look. The engineered balance of the electro-acoustic parameters make the HX subwoofers suitable for sealed acoustic suspension enclosures as well as vented reflex enclosures, generating powerful, dynamic low frequency response.

Hi-Energy HX Subwoofers represent the highest technological expression in terms of low frequency reproduction. The V-cone provides wide acoustic dispersion, making the sound even more powerful.

The Hertz SPL Show subwoofers are the ideal solution for building mobile audio systems with emphasis placed on low frequency power and impact.
Featuring a stacked triple magnet motor assembly and 2 + 2 ohm dual voice coil, the three models, SX 250D, SX 300D, SX 380D differ only in their cone diameter: 250 mm, 300 mm, 380 mm respectively.
The SPL Show moving assembly is designed to ensure long and linear excursion. They feature a dual spider design and a four-layer voice coil wound on an extraordinary long aluminium former.
The Back Vented Spider Support decreases voice coil operating temperature, even during enhanced SPL usage. By connecting the two voice coils in parallel, impedance is cut in half, making the most of the amplifier's available power and achieving even higher sound pressure levels.

ML subwoofers are the ideal solution for any installation. Designed to work in free air or in large volumes like luggage compartments, these components are extremely musical and can evoke the same feelings as live music. When they are connected to suitable power amplifiers, they immediately prove their strong, resolute nature.

The M 12 UNLIMITED and M 15 UNLIMITED subwoofers are designed for true SPL competitors.
The M 12 UNLIMITED and M 15 UNLIMITED offer the ability to choose the moving assembly which is most appropriate for the overall system design and conditions, achieving maximum SPL in every competition. The innovative RMA, Removable Moving Assembly, provides the ability to replace the entire mobile assembly in few seconds, without removing the speaker from its mounting position. For each configuration you can choose the mobile assembly which is most effective, differing in the number of spiders, cone material and voice coil impedance.
The SPL Monster subwoofers will undergo continued modifications and upgrades, thanks to our ongoing research and the feedback we welcome from the competition field!

Energy ES subwoofers were designed to work best when used in small enclosures. However, their electro-acoustic parameters are optimised for use in many different enclosure types; both in terms of typology (sealed box, reflex, bandpass, etc.) and in size, insuring extraordinary versatility and performance. The use of a long excursion mobile voice coil and high flux density double magnet have created subwoofers that can stand very high power with outstanding musicality and bursting dynamics. The special anti-scratch finish and butyl rubber rings offer protection and an aggressive look.

Hi-Energy HX Subwoofers represent the highest technological expression in terms of low frequency reproduction. The V-cone provides wide acoustic dispersion, making the sound even more powerful.
The forced ventilation system provided by the venting holes on the bottom plate, along with a specifically designed extended centre pole piece and the materials selected for the voice coil, combine for high thermal dissipation. The ultra-light aluminium basket, with its spoke shared profile, reduces any unwanted resonance from the chassis itself. The special finishing materials and the rubber protection covering the magnetic assembly, besides decreasing resonance, add an aggressive, stylistic cosmetic look. The engineered balance of the electro-acoustic parameters make the HX subwoofers suitable for sealed acoustic suspension enclosures as well as vented reflex enclosures, generating powerful, dynamic low frequency response.

The forced ventilation system provided by the venting holes on the bottom plate, along with a specifically designed extended centre pole piece and the materials selected for the voice coil, combine for high thermal dissipation. The ultra-light aluminium basket, with its spoke shared profile, reduces any unwanted resonance from the chassis itself. The special finishing materials and the rubber protection covering the magnetic assembly, besides decreasing resonance, add an aggressive, stylistic cosmetic look. The engineered balance of the electro-acoustic parameters make the HX subwoofers suitable for sealed acoustic suspension enclosures as well as vented reflex enclosures, generating powerful, dynamic low frequency response.

The Hertz SPL Show subwoofers are the ideal solution for building mobile audio systems with emphasis placed on low frequency power and impact.
Featuring a stacked triple magnet motor assembly and 2 + 2 ohm dual voice coil, the three models, SX 250D, SX 300D, SX 380D differ only in their cone diameter: 250 mm, 300 mm, 380 mm respectively.
The SPL Show moving assembly is designed to ensure long and linear excursion. They feature a dual spider design and a four-layer voice coil wound on an extraordinary long aluminium former.
The Back Vented Spider Support decreases voice coil operating temperature, even during enhanced SPL usage. By connecting the two voice coils in parallel, impedance is cut in half, making the most of the amplifier's available power and achieving even higher sound pressure levels.

M 15 UNLIMITED subwoofers are designed for true SPL competitors.
M 15 UNLIMITED offer the ability to choose the moving assembly which is most appropriate for the overall system design and conditions, achieving maximum SPL in every competition. The innovative RMA, Removable Moving Assembly, provides the ability to replace the entire mobile assembly in few seconds, without removing the speaker from its mounting position. For each configuration you can choose the mobile assembly which is most effective, differing in the number of spiders, cone material and voice coil impedance.
The SPL Monster subwoofers will undergo continued modifications and upgrades, thanks to our ongoing research and the feedback we welcome from the competition field!

Energy systems are the ideal solution to install a very good quality system in factory locations. Given with complete mounting hardware, these systems synthesize and fully represent Energy line sound philosophy. Listening to pure energy.

The SV 165 midrange can be employed to build systems with tremendous impact. Like the SX subwoofers, the SV 165 features a solid, robust structure and, like all the other SPL Show components, it employs an extremely compact aluminium wound voice coil, for unheard-of thermal and mechanical capability also in extreme circumstances. Special attention has been paid to the venting system: the air dissipation is eased through the holes in the bottom plate of the speaker. The cone features paper dust caps, both robust and light weight, as well as double-wave damped fabric surrounds to ensure linearity even under extreme conditions, contributing to high SPL scores.

he Hertz SPL show series can now be used to build an entire matched system with tremendous impact and almost unparalleled SPL performance.
The SV 200 is the 200mm (8’’) midrange designed for SPL competitions. Like the SX subwoofers, the SV 200 features a solid, robust structure and, like all the other SPL Show components, it employs an extremely compact aluminium wound voice coil, for unheard-of thermal and mechanical capability also in extreme circumstances. Special attention has been paid to the venting system: the air dissipation is eased through the holes in the bottom plate of the speaker. The cone features paper dust caps, both robust and light weight, as well as double-wave damped fabric surrounds to ensure linearity even under extreme conditions, contributing to high SPL scores.

Performances without using separate components. ECX Energy coaxial are equipped with a unique tweeter features a new Tetolon® soft dome with built-in crossover. Every element is optimized for maximum reliability and efficiency. The magnet , with its implemented size to ensure excellent control of the mobile voice coil movement, and the neodymium dome tweeter offer unprecedented timber quality and linearity for a coaxial.

Designed to provide bursting dynamics and to minimise size requirements, EBX products result from long studies about car compartment acoustics. These boxes have a truncated pyramid section and double inclination walls, not to affect sound; they are made of very thick MDF, in order for them to be inert and stable. The original die-cast steel grille eliminates direct resonances and compression. The anti-scratch, molded polyamide and epoxy finish, as well as the absence of sharp corners, eases the box placement and makes installation safer. B models bandpass configuration offers wide, linear bass response; they are very good for jazz and classical music. The best solution to every need.

Hertz Energy 250mm Reflex Enclosed Car Subwoofer 4Ohm Impedance, 700w Peak Power, Water Repellent Pressed Paper Cone EBX250

Designed to provide bursting dynamics and to minimise size requirements, EBX products result from long studies about car compartment acoustics. These boxes have a truncated pyramid section and double inclination walls, not to affect sound; they are made of very thick MDF, in order for them to be inert and stable. The original die-cast steel grille eliminates direct resonances and compression. The anti-scratch, molded polyamide and epoxy finish, as well as the absence of sharp corners, eases the box placement and makes installation safer. B models bandpass configuration offers wide, linear bass response; they are very good for jazz and classical music. The best solution to every need.

Constructed from very thick, dense fibreboard, the DBX 250 offers a rich, fast and powerful low frequency range. The proprietary Xpontential Flanged Duct reduces air flow disturbances to a minimum, while the “pyramid” shaped design eliminates internal resonances and aids in the installation possibilities.
Technical spec sheet

HT20R is a ribbon supertweeter with a very light mylar membrane with a silver deposit. It's powerful high effiency REN motor and the special faceplate optimise the response at high frequencies. The 1W10 crossover also included integrates the HT 20R response into any existing audio system.

Specifications:

* » Product: HT20R
* » Supertweeter: 20mm Ribbon
* » Sensitivity: 90dB/SPL
* » Impedance: 4 Ohms
* » Power Handling: 100 Watts Peak Power, 50 Watts Continuous
* » Frequency response: 6kHz-40kHz
* » 1 Way passive Crossover: 10kHz 18db Oct
* » Tweeter adjustment: -2,0,+2.0

The MLCX 2 TM is the passive crossover dedicated to filter Mille midrange and tweeter components in an Active/Passive multi-amplified three-way system. Being the best choice to enhance the natural qualities of the Mille components, the MLCX 2 TM also features a three position level control for the tweeter, providing the ability to fine-tune the transducer’s emission and achieve perfect acoustical results in any type of configuration.

MLCX 2 TW is the Mille passive crossover dedicated to the ML 1600 and ML 280, creating a perfect 2-way system. It features a three position level control for the tweeter as well as top quality components; it can effectively shape the acoustic response of the components installed in the vehicle, generating a consistent sound, harmonious in every detail.

The ML 280 tweeter offers hi-tech solutions; optimized through the most innovative technologies, a refined selection of materials as well as a very high-quality production process. The Tetolon® Fiber dome features a hemispheric-hyperbolic profile, while the double REN® Neodymium motor assembly generates extraordinary magnetic flux density within the air gap. An advanced venting system, based on vent holes on the back plate, ensures dissipation of the heat generated inside the extra light CCAW (Copper Clad Aluminium Wire) voice coil, wound on a Kapton ® former.

The ML 700 unique materials used in this remarkable driver are plain to: the pressed-pulp cone combined with cotton fibres, the Natural Butyl Rubber surround, the spider constructed from Nomex®, the CCAW (Copper Clad Aluminium Wire) voice coil wound on a Kapton® former. Additionally, the use of the advanced Klippel Scanning Vibrometer measurement instrument provided fine-tuning of the motor assembly to obtain a mid-frequency range with linearity and accuracy. The self-supporting basket and butyl rubber cover make the ML 700 a perfect and unique component both for two-way and three-way configurations.

MLK 3 PA2 is a complete three-way system with dual woofers on each channel. For those who want to install an audio system with no compromise, the dual woofer system of the MLK 3 PA2 offers extended and strengthened low range emission. Being state-of-the-art in its refined design, innovation and technological solutions pay off with the highest possible acoustic results.

The SV 250 midrange is the ideal solution for spectacular multiple woofer installations, even under extreme conditions, thanks to its minimised depth. Like the SX subwoofers, the SV 250 features a solid, robust structure and, like all the other SPL Show components, it employs an extremely compact aluminium wound voice coil, for unheard-of thermal and mechanical capability also in extreme circumstances. Special attention has been paid to the venting system: the air dissipation is eased through the holes in the bottom plate of the speaker. The cone features paper dust caps, both robust and light weight, as well as double-wave damped fabric surrounds to ensure linearity even under extreme conditions, contributing to high SPL scores.

The SV 200L woofer was designed to offer superior performance in terms of both thermal and mechanical capability. The target has been fully hit since the woofer features a pure copper voice coil wound on KSV former, an oversized magnet and a vented bottom plate. The SV 200L employs the proprietary V-cone technology with the cone constructed from pulp with cotton fibre as well as Lossless Polymer Rubber Surround, offering a powerful low frequency response as well as the best off-axis dispersion.

The ST 44 tweeter, like the ST 25 and the ST 35, employs a CCAR (Copper Clad Aluminium Ribbon) voice coil featuring an extra-light aluminium membrane with high thermal dissipation as well as an anodized aluminium body, for maximum damping and vibration rejection. It additionally features a 44 mm (1’’ ¾) voice coil and a powerful ferrite magnet, creating maximum SPL in extreme installations.

Extremely compact size for explosive performance: ST 35 is the first Hertz tweeter specifically designed for SPL competitions. The 35 mm ST 35 with CCAR (Copper Clad Aluminium Ribbon) voice coil features an extra-light aluminium membrane with high thermal dissipation. An extremely powerful Neodymium REN® magnet is employed along with a highly efficient compression loading horn, designed for maximum high frequency acoustic pressure.

The surround features a smooth profile, adding to its naturalness and timbre accuracy. The spider exploits the excellent mechanical properties of Nomex®, the mobile voice coil is wound on extra light CCAW (Copper Clad Aluminium Wire) wound on a Kapton® former; the REN® Neodymium motor assembly generates a high-density magnetic flux, to achieve excellent dynamics, contrast and efficiency. Its versatility allows the ML 1600 to offer its highest potential in two-way systems as easily as it reproduces, without compromise, the mid-bass frequency in multi-way systems.

The MLK 2 TW is a two-way system that can reproduce the complete frequency spectrum with maximum simplicity and versatility. The combination of the ML 280 tweeter, ML 1600 woofer along with the MLCX 2 TW crossover provide the ability to create a custom system in any vehicle. MLK 2 TW recreates a complete, all-encompassing sound with superior timbre accuracy.

The MLK 2 TM is a two-way system dedicated to mid-high frequencies. Installing this system in one’s own car means not wanting to give up on timbre quality, yet going beyond the physical limits of the vehicle, all the while enjoying any musical genre. Composed of the ML 280 tweeter the ML 700 midrange and MLCX 2 TM crossover, the MLK 2 TM offers unique performance, superior technology and sophisticated design.