Tweeters

Hertz DT16 neodymium tweeter insures high level performance and accurate, colourless high frequency response thanks to its very light Mylar membrane. Installation is universal, thanks to the various mounting supports provided, including both surface and flush mounting.
* Size - 15mm (19/32")
* Comp - Myler dome, neodymium magnet tweeter
* Xover - Factory provided crossover DX100
* Sensitivity - 93dB/SPL Power - 80W@3.5kHz 12dB/Oct
* Frequency Range - 3 - 21kHz
* Impedence - 4 Ohm

Compactness, power handling, clear sound: ET 20 has an innovative, very light 20 mm Tetolon® soft dome which insures very fast response. The neodymium magnet efficiently controls mobile voice coil movement, providing this tweeter with high sensitivity and clear, natural sound. ET 20 is given with rich mounting hardware, which always allows the best installation solution in the most difficult positions.

Utmost performances in minimum space. HT 25 tweeter provides excellent sound quality. It’s very small and very versatile. Its semispheric soft dome is made of pre-coated TETOLON® and provides flat high frequency response, tonal accuracy and natural sound. Its rear acoustic chamber insures low Fs and very good transient response. The neodymium magnet combines high energy for mobile voice coil control and small size. The housings given with it permit to correctly install it in whatever car compartments, in order to build outstanding two or multi-way systems.

Extremely compact size for explosive performance: ST 25 is the first Hertz tweeter specifically designed for SPL competitions. The 25 mm ST 25 with CCAR (Copper Clad Aluminium Ribbon) voice coil features an extra-light aluminium membrane with high thermal dissipation. An extremely powerful Neodymium REN® magnet is employed along with a highly efficient compression loading horn, designed for maximum high frequency acoustic pressure.
* 25mm bullet tweeter for extreme applications
* Magnet: Neodymium REN ®
* Power handling: 100W @ 2.5kHz 12dB Oct.
* Impedance: 4 ohms
* Efficiency dB / SP: 107dB
* Frequency: 3kHz-20kHz
* Depth: 33.5mm
* Diameter of mounting hole: 43.5mm

HT20R is a ribbon supertweeter with a very light mylar membrane with a silver deposit. It's powerful high effiency REN motor and the special faceplate optimise the response at high frequencies. The 1W10 crossover also included integrates the HT 20R response into any existing audio system.

Specifications:

* » Product: HT20R
* » Supertweeter: 20mm Ribbon
* » Sensitivity: 90dB/SPL
* » Impedance: 4 Ohms
* » Power Handling: 100 Watts Peak Power, 50 Watts Continuous
* » Frequency response: 6kHz-40kHz
* » 1 Way passive Crossover: 10kHz 18db Oct
* » Tweeter adjustment: -2,0,+2.0

MLCX 2 TW is the Mille passive crossover dedicated to the ML 1600 and ML 280, creating a perfect 2-way system. It features a three position level control for the tweeter as well as top quality components; it can effectively shape the acoustic response of the components installed in the vehicle, generating a consistent sound, harmonious in every detail.

The ML 280 tweeter offers hi-tech solutions; optimized through the most innovative technologies, a refined selection of materials as well as a very high-quality production process. The Tetolon® Fiber dome features a hemispheric-hyperbolic profile, while the double REN® Neodymium motor assembly generates extraordinary magnetic flux density within the air gap. An advanced venting system, based on vent holes on the back plate, ensures dissipation of the heat generated inside the extra light CCAW (Copper Clad Aluminium Wire) voice coil, wound on a Kapton ® former.

The ST 44 tweeter, like the ST 25 and the ST 35, employs a CCAR (Copper Clad Aluminium Ribbon) voice coil featuring an extra-light aluminium membrane with high thermal dissipation as well as an anodized aluminium body, for maximum damping and vibration rejection. It additionally features a 44 mm (1’’ ¾) voice coil and a powerful ferrite magnet, creating maximum SPL in extreme installations.

Extremely compact size for explosive performance: ST 35 is the first Hertz tweeter specifically designed for SPL competitions. The 35 mm ST 35 with CCAR (Copper Clad Aluminium Ribbon) voice coil features an extra-light aluminium membrane with high thermal dissipation. An extremely powerful Neodymium REN® magnet is employed along with a highly efficient compression loading horn, designed for maximum high frequency acoustic pressure.