Thanks to DIECI SYSTEM, you can easily build very good quality audio systems. Woofers performs at best when used in factory cut-outs and DT 16 neodymium tweeter provides clear, wide high frequency response. The passive filters, directly made on connecting wires, and rich hardware given with these systems increase installation possibilities, in whatever conditions.

• Size - 130mm (5.1/4") Woofer. 15mm (19/32") Tweeter.
• Comp - 2 Way system: High density flux ferrite magnet, water repellent pressed paper cone woofer + DT16 tweeter.
• Xover - Factory provided crossovers - DX100 (Tweeter) + DX200 (low pass)
• Sensitivity - 91dB/SPL
• Power - 120W Peak Power, 60W xontinuos Program Power
• Frequency Range - 60Hz - 21kHz
• Impedence - 4 Ohm

Thanks to DIECI SYSTEM, you can easily build very good quality audio systems. Woofers performs at best when used in factory cut-outs and DT 16 neodymium tweeter provides clear, wide high frequency response. The passive filters, directly made on connecting wires, and rich hardware given with these systems increase installation possibilities, in whatever conditions.

• Size - 165mm (6.1/2") Woofer. 15mm (19/32") Tweeter.
• Comp - 2 Way system: High density flux ferrite magnet, water repellent pressed paper cone woofer + DT16 tweeter.
• Xover - Factory provided crossovers - DX100 (Tweeter) + DX200 (low pass)
• Sensitivity - 93dB/SPL
• Power - 160W Peak Power, 80W xontinuos Program Power
• Frequency Range - 50Hz - 21kHz
• Impedence - 4 Ohm

Energy ESK 130

ENERGY SYSTEM products are the simplest solution to install a very good quality system in factory locations. Special filters are built into connection cables and located in translucent ABS, shockproof housings, very easy and quick to fit. Supplied with complete mounting hardware, these systems deliver ENERGY line sound philosophy - Listening to pure energy.

Specifications:

• » 2-way Component System
• » Woofer: 130mm
• » Tweeter: 20mm
• » Sensitivity: 90dB/SPL
• » Impedance: 4 Ohms
• » Power Handling: 150 Watts Peak Power, 75 Watts Continuous
• » Speaker cable: 20 metres Connection B 18

HERTZ Energy ESK 165

ENERGY SYSTEM products are the simplest solution to install a very good quality system in factory locations. Special filters are built into connection cables and located in translucent ABS, shockproof housings, very easy and quick to fit. Supplied with complete mounting hardware, these systems deliver ENERGY line sound philosophy - Listening to pure energy.

Specifications:

• » 2-way Component System
• » Woofer: 165mm
• » Tweeter: 20mm
• » Sensitivity: 91dB/SPL
• » Impedance: 4 Ohms
• » Power Handling: 200 Watts Peak Power, 100 Watts Continuous

HERTZ, ENERGY System, KIT 2Way+Grille 165mm

Energy systems are the ideal solution to install a very good quality system in factory locations. Given with complete mounting hardware, these systems synthesize and fully represent Energy line sound philosophy. Listening to pure energy.

• Size: 165mm Woofer, 20mm Tweeter
• Comp: 2-Way system:
• EV 165 Woofer
• ET 20 Tweeter
• CX 200 Crossover
• Sensitivity: 93dB/SPL
• Power Handling: 200w Peak, 100w Continuous
• Frequency Response: 65Hz - 23kHz
• Impedance: 4 Ohm

HERTZ Energy ESK 163S

ENERGY SYSTEM products are the simplest solution to install a very good quality system in factory locations. Special filters are built into connection cables and located in translucent ABS, shockproof housings, very easy and quick to fit. Supplied with complete mounting hardware, these systems deliver ENERGY line sound philosophy - Listening to pure energy.

Specifications:

• » 3-way Component System
• » Woofer: 165mm
• » Midrange: 100mm
• » Tweeter: 20mm
• » Sensitivity: 92dB/SPL
• » Impedance: 4 Ohms
• » Power Handling: 250 Watts Peak Power, 125 Watts Continuous

HERTZ High Energy HSK 130

Completeness and versatility, technology and performances: all you need to easily build extraordinary systems. The Hi-Energy System line includes a wide range of complete kits, consisting of the excellent HT 25 neodymium tweeter and HV woofers, individually combined with a special crossover. Provided with the tweeter mounting hardware, with grilles and an easy owner's manual, HERTZ systems achieve the best results in every car compartment thanks to the inclusion of three methods of tweeter.

Specifications:

• » 2-way Component System
• » Woofer: 130mm
• » Tweeter: 25mm
• » Sensitivity: 91dB/SPL
• » Impedance: 4 Ohms
• » Power Handling: 200 Watts Peak Power, 100 Watts Continuous

HERTZ High Energy HSK 165

Completeness and versatility, technology and performances: all you need to easily build extraordinary systems. The Hi-Energy System line includes a wide range of complete kits, consisting of the excellent HT 25 neodymium tweeter and HV woofers, individually combined with a special crossover. Provided with the tweeter mounting hardware, with grilles and an easy owner?s manual, HERTZ systems achieve the best results in every car compartment thanks to the inclusion of three methods of tweeter.

Specifications:

• » 2-way Component System
• » Woofer: 165mm
• » Tweeter: 25mm
• » Sensitivity: 92dB/SPL
• » Impedance: 4 Ohms
• » Power Handling: 250 Watts Peak Power, 125 Watts Continuous

HERTZ SPACE K6L

Extremely shallow profile, light and powerful. These main points, along with perfect timbre quality, are the essence of Space loudspeakers. With all the attributes of speakers twice the depth, these innovative systems deliver excellent results where mounting depth is of a premium. The woofer?s Hyperbolic Paper Cone® is high pressure moulded, from water-repellent paper. Its special hyperbolic profile and double wave rubber surround stiffen the cone area, increasing the radiating surface and flattening high frequency response. Accurate reproduction of all types of music.

Specifications:

• » 2-way Component System
• » Woofer: 165mm
• » Tweeter: 28mm
• » Sensitivity: 93dB/SPL
• » Impedance: 4 Ohms
• » Power Handling: 200 Watts Peak Power, 100 Watts Continuous

HERTZ High Energy HSK 163

Completeness and versatility, technology and performances: all you need to easily build extraordinary systems. The Hi-Energy System line includes a wide range of complete kits, consisting of the excellent HT 25 neodymium tweeter and HV woofers, individually combined with a special crossover. Provided with the tweeter mounting hardware, with grilles and an easy owner?s manual, HERTZ systems achieve the best results in every car compartment thanks to the inclusion of three methods of tweeter.

Specifications:

• » 3-way Component System
• » Woofer: 165mm
• » Midrange: 70mm
• » Tweeter: 25mm
• » Sensitivity: 92dB/SPL
• » Impedance: 4 Ohms
• » Power Handling: 300 Watts Peak Power, 150 Watts Continuous

HERTZ SPACE K8L

Extremely shallow profile, light and powerful. These main points, along with perfect timbre quality, are the essence of Space loudspeakers. With all the attributes of speakers twice the depth, these innovative systems deliver excellent results where mounting depth is of a premium. The woofers Hyperbolic Paper Cone® is high pressure moulded, from water-repellent paper. Its special hyperbolic profile and double wave rubber surround stiffen the cone area, increasing the radiating surface and flattening high frequency response. Accurate reproduction of all types of music.

Specifications:

• » 2-way Component System
• » Tweeter: 28mm
• » Sensitivity: 93dB/SPL
• » Impedance: 4 Ohms
• » Power Handling: 250 Watts Peak Power, 125 Watts Continuous

HERTZ MILLE MLK 165

The wish to achieve the best sound performance is not the only issue to consider when making an audio system. Those who buy a speakers system often make their choice through their eyes, heart and passion and they probably do not want to make any compromise. MLK 165 is a two-way kit designed for those who like customizing everything in their car, even the sound: aggressive in every respect, innovative for its technology, powerful in performance, but above all with an extremely winning look. Thanks to the bi-amplification connections, to increase the driving power, and the HFC, to optimize the acoustic response in every installation, all the speakers capacities can be performed naturally. Do not take anything for granted, from the lowest notes the system shows a great personality and a full-bodied sound that can be expected from much bigger speakers. The bass dynamic impact, control and depth are supported by a remarkable linearity, with its typical solid and firm timber features. The listening feeling is consistent and real. The energy flowing from the speakers recreates extraordinary sensations of speed and power.

Specifications:

• » 2-way Component System
• » Woofer: 165mm
• » Tweeter: 28mm
• » Sensitivity: 92dB/SPL
• » Impedance: 4 Ohms
• » Power Handling: 300 Watts Peak Power, 150 Watts Continuous

HERTZ SPACE K6

Extremely shallow profile, light and powerful. These main points, along with perfect timbre quality, are the essence of Space loudspeakers. With all the attributes of speakers twice the depth, these innovative systems deliver excellent results where mounting depth is of a premium. The woofers Hyperbolic Paper Cone® is high pressure moulded, from water-repellent paper. Its special hyperbolic profile and double wave rubber surround stiffen the cone area, increasing the radiating surface and flattening high frequency response. Accurate reproduction of all types of music.

Specifications:

• » 2-way Component System
• » Woofer: 165mm
• » Tweeter: 28mm
• » Sensitivity: 91dB/SPL
• » Impedance: 4 Ohms
• » Power Handling: 250 Watts Peak Power, 125 Watts Continuous

HERTZ SPACE K8

Extremely shallow profile, light and powerful. These main points, along with perfect timbre quality, are the essence of Space loudspeakers. With all the attributes of speakers twice the depth, these innovative systems deliver excellent results where mounting depth is of a premium. The woofers Hyperbolic Paper Cone® is high pressure moulded, from water-repellent paper. Its special hyperbolic profile and double wave rubber surround stiffen the cone area, increasing the radiating surface and flattening high frequency response. Accurate reproduction of all types of music.

Specifications:

• » 2-way Component System
• » Woofer: 200mm
• » Tweeter: 28mm
• » Sensitivity: 92dB/SPL
• » Impedance: 4 Ohms
• » Power Handling: 300 Watts Peak Power, 150 Watts Continuous

HERTZ MLK 2

The most beautiful element of Mille systems is the sound. The system's main characteristic is clearly perceptible, superior tonal accuracy. This stunning range recreates the tri-dimensional quality of musical instruments and makes the listener feel as if they are taking part in a musical event.

Colourless sound, controlled, full, solid bass impact and exceptional dynamic response makes for an involving audio experience. The tweeters offer variable chamber size for increased flexibility and performance. Off-axis response is perfectly even, making for detailed, clear, definite sound image for the passenger and not just the driver. Mille Systems feature a unique analogue time alignment facility.

If you focus on the components technical features, you risk to lose touch with the most beautiful element of Mille systems: sound. A state-of-the-art installation, even if simply made in factory locations but with utmost attention to fixing and vibrations rejection, will enhance musicality. The system main characteristic is clearly perceptible: superior tonal accuracy. Sound recreates the instruments tridimensionality and makes the listener feel as if he took part in the musical event. Colorless sound, controlled, full, solid bass impact, very good dynamic reserve which performs at best when the musical track involves you the most, for blur-free reproduction. ML 280 off-axis response is perfectly even, as well as its off-axis response; this ensures detailed, clear, definite sound image. Thanks to the filter efficient action, sound stage gets higher and centered, making voices natural and firm, singling every element out in the orchestra, easily recreating real, complete, detailed sound. MLK 2 installation in the car compartment is eased by the woofer standard size (thanks to its neodymium magnet, it is shorter) and by the tweeter with aluminium structure and differentiated acoustic chambers. Extraordinary versatility is ensured by the passive filter and by its adjustments. Tuning is spontaneous in any car, since you can handle the listening position you prefer, the response equalisation, the components efficiency. Simply by moving the jumpers for the various controls, you can achieve the smoothest response in whatever conditions, for extraordinary excitement.

Specifications:

• » 2-way Component System
• » 165mm Woofer
• » 28mm Tweeter (adjustable chamber)
• » 2-way Passive Crossover (2.8Khz, 12dB per octave)
• » Maximum 300 Watts

HERTZ MLK 3

The most beautiful element of Mille systems is the sound. The system's main characteristic is clearly perceptible, superior tonal accuracy. This stunning range recreates the tri-dimensional quality of musical instruments and makes the listener feel as if they are taking part in a musical event.

Colourless sound, controlled, full, solid bass impact and exceptional dynamic response makes for an involving audio experience. The tweeters offer variable chamber size for increased flexibility and performance. Off-axis response is perfectly even, making for detailed, clear, definite sound image for the passenger and not just the driver. Mille Systems feature a unique analogue time alignment facility.

When having everything is not enough, the choice of a three way system gets obvious, necessary. MLK 3 is not a simple evolution of a two way system, rather a complete system created to satisfy the most demanding users. The woofer is quick and clean whenever power is needed; it ensures accurate, full, solid mid-basses conveying, thus, the instruments stresses. The use of a ribbon midrange, ML 500R, and of ML 280 tweeter allows the system transparency and naturalness when reproducing male and female voices: their details and tones get lively in the sound stage center. The piano, which is extremely accurate thanks to its linearity, sounds sweet, even, natural, and the filter leads the components the way a conductor gives parts and scores to his best players. Installing a three way system involves very important considerations when designing it; yet, all efforts are rewarded by MLK 3 superb acoustic performance.

Specifications:

• » 3-way Component System
• » 165mm Woofer
• » 117mm X 15mm Ribbon driver
• » 28mm Tweeter (adjustable chamber)
• » 3-way Passive Crossover (900Hz @ 12/12dB per octave, 4.55Khz @ 6/12dB per octave)
• » Maximum 300 Watts