Special offer
Hertz EP 4 380W Amplifier
The EP 4 is an amplifier designed to reproduce any musical genres: thanks to its four separate channels, it provides many different system configurations. Pre-amplified inputs as well as hi-level inputs offer the possibility for the EP 4 to be interfaced with any head units, including factory OEM sources.
4 Channel 380Watt RMS
Output Power RMS 14.4 VDC.
- 4 x 60W 4Ω
- 4 x 95W 2Ω
- 2 x 60W 4Ω + 1 x 190W 4Ω
- 2 x 95W 2Ω + 1 x 190W 4Ω
- 2 x 190W 4Ω
Energy-Power: Instinct, Desire, Demand
EP, Energy-Power, the new amplifier line, is the perfect balance
between original design, high performance and market competitiveness:
the result is a product with the highest quality / value ratio available
in the entry-level segment of the car audio electronics market.
The know-how acquired with the development of the reference HP,
Hi-Power line, as well as the continued research carried out by the
Elettromedia R&D Division made the creation of the Energy-Power
line possible; boasting care for accurate design, build quality and
performance superior to traditional products.
With the new Energy-Power amplifiers, you can now enjoy the pleasure
of listening to hi-fidelity music in your car, with an entry-level product
offering solutions usually reserved for reference products costing much
more. Energy-Power: quenching the desire for engaging, dynamic
sound in your own car now becomes instinctive.
Energy-Power series features special pseudo-balanced dual input circuitry to reject electromagnetic disturbances detected on the RCA or Speaker level inputs. ARTTM, Automatic Remote Turn-On/Off circuitry eliminates the need for a remote signal when using Speaker-In input automatically turning on and off the amplifier when the source is turned on and off. ARTTM provides also a Remote Out signal at the Remote In terminal to turn on/off other components installed in the system. EP series offers the possibility to be interfaced with traditional pre-amplified sources or speaker level OEM sources. A small size cabled connector is provided to wire in comfort and safety the Speaker-In input. On EP 1 D a pre-amplified signal is available from Speaker-In input at the Pre-Out RCAs to be sent to the rest of the amplifiers in the system.
only £189.99
Featured products
Hertz DT 16 Tweeters
Hertz DT16 Tweeters
This neodymium tweeter insures high level performances and accurate, colourless high frequency response thanks to its very light Mylar membrane. Its installation is universal thanks to the hardware provided with it, which allows surface and flush mounting
This neodymium tweeter insures high level performances and accurate, colourless high frequency response thanks to its very light Mylar membrane. Its installation is universal thanks to the hardware provided with it, which allows surface and flush mounting
- Size - 15mm (19/32")
- Comp - Myler dome, neodymium magnet tweeter
- Xover - Factory provided crossover DX100
- Sensitivity - 93dB/SPL
- Power - 80W@3.5kHz 12dB/Oct
- Frequency Range - 3 - 21kHz
- Impedence - 4 Ohm
only £24.99
Hertz DCX130 Speakers
Hertz DCX130 13cm Dieci 80W Speakers
DIECI COAX are coaxial speakers which combine a real woofer, the very good DT 16 tweeter and a special crossover. This mix insures excellent sound, in every kind of cars.
Please note: Grills are NOT supplied.
DIECI COAX are coaxial speakers which combine a real woofer, the very good DT 16 tweeter and a special crossover. This mix insures excellent sound, in every kind of cars.
- Size - 130mm (5.1/4") Woofer. 15mm (19/32") Tweeter.
- Comp - 2 Way system: High density flux ferrite magnet, water repellent pressed paper cone woofer. Neodymium magnet, mylar dome tweeter.
- Sensitivity - 91dB/SPL
- Power - 80W Peak Power, 40W xontinuos Program Power
- Frequency Range - 60Hz - 21kHz
- Impedence - 4 Ohm
Please note: Grills are NOT supplied.
only £43.99
Hertz EP 1D Monobloc Amplifier
Hertz EP1D Mono 1000W RMS Amplifier
Monobloc 1000W RMS Output Power RMS 14.4 VDC.
EP, Energy-Power, the new amplifier line, is the perfect balance between original design, high performance and market competitiveness: the result is a product with the highest quality
Monobloc 1000W RMS
Output Power RMS 14.4 VDC.
- 1 x 400W 4Ω
- 1 x 750W 2Ω
- 1 x 1000W 1Ω EP Link
- 1 x 1500W 4Ω EP Link
- 1 x 1700W 2Ω
Energy-Power: Instinct, Desire, Demand
EP, Energy-Power, the new amplifier line, is the perfect balance
between original design, high performance and market competitiveness:
the result is a product with the highest quality / value ratio available
in the entry-level segment of the car audio electronics market.
The know-how acquired with the development of the reference HP,
Hi-Power line, as well as the continued research carried out by the
Elettromedia R&D Division made the creation of the Energy-Power
line possible; boasting care for accurate design, build quality and
performance superior to traditional products.
With the new Energy-Power amplifiers, you can now enjoy the pleasure
of listening to hi-fidelity music in your car, with an entry-level product
offering solutions usually reserved for reference products costing much
more. Energy-Power: quenching the desire for engaging, dynamic
sound in your own car now becomes instinctive.
Energy-Power series features special pseudo-balanced dual input circuitry to reject electromagnetic disturbances detected on the RCA or Speaker level inputs. ARTTM, Automatic Remote Turn-On/Off circuitry eliminates the need for a remote signal when using Speaker-In input automatically turning on and off the amplifier when the source is turned on and off. ARTTM provides also a Remote Out signal at the Remote In terminal to turn on/off other components installed in the system. EP series offers the possibility to be interfaced with traditional pre-amplified sources or speaker level OEM sources. A small size cabled connector is provided to wire in comfort and safety the Speaker-In input. On EP 1 D a pre-amplified signal is available from Speaker-In input at the Pre-Out RCAs to be sent to the rest of the amplifiers in the system.
only £375.99
Hertz DSK165 Speakers
Hertz DSK165 120W Speakers
Thanks to DIECI SYSTEM, you can easily build very good quality audio systems. Woofers performs at best when used in factory cut-outs and DT 16 neodymium tweeter provides clear, wide high frequency response. The passive filters, directly made on connecting wires, and rich hardware given with these systems increase installation possibilities, in whatever conditions.
Thanks to DIECI SYSTEM, you can easily build very good quality audio systems. Woofers performs at best when used in factory cut-outs and DT 16 neodymium tweeter provides clear, wide high frequency response. The passive filters, directly made on connecting wires, and rich hardware given with these systems increase installation possibilities, in whatever conditions.
- Size - 165mm (6.1/2") Woofer. 15mm (19/32") Tweeter.
- Comp - 2 Way system: High density flux ferrite magnet, water repellent pressed paper cone woofer + DT16 tweeter.
- Xover - Factory provided crossovers - DX100 (Tweeter) + DX200 (low pass)
- Sensitivity - 93dB/SPL
- Power - 160W Peak Power, 80W xontinuos Program Power
- Frequency Range - 50Hz - 21kHz
- Impedence - 4 Ohm